By using this site you consent to the use of cookies for the sole purpose of providing the full functionality of this website and its related services.

For more information please refer to Terms of use and Privacy & Cookies   No Thanks

You have requested to download the HMI (SHELL) software

System Requirements
A guide to the minimum requirements for running the HMI include (Mike11 and ISIS users):

  • Mike11 - Version 2007 or ISIS - InfoWorks 7.01
  • 200MHz Pentium PC;
  • 128Mb memory minimum. 256Mb memory recommended;
  • Hard disk with 200Mb space available. Most master databases used for serious modelling work will be larger than this. Some may be many times larger. You will need to regularly check that you have enough space;
  • 1024x768 resolution, high-colour (16 or 24-bit) graphics card and screen. It is easier to work with multiple windows open if you have as high a screen resolution as possible;
  • CD-ROM drive;
  • Windows 2000 or Windows NT 4.0 (or later versions);
  • The HMI can also be run on any standard Windows-based network, although this may result in longer simulation times.

You can download the HMI in either a compiled or raw code form, both are supplied as zip files, which will require the contents to be extracted to a folder of your choice. For all installation instructions refer to the manual included in the zip files.

Download the HMI (SHELL) software

Quick links

Last Modified on: 30 August 2012
Printed from the Estuary Guide on 27/09/2023 02:24:28