Cookies are turned off so parts of the site will not function correctly.
For more information please refer to Terms of use and Privacy & Cookies   Turn Cookies On

Advection-diffusion models

Method indicator
Bottom-Up Hybrid Top-Down

Summary of key issues:

Issue Description
Description Such models are intended to make predictions through solution of the so-called advection-diffusion equation, which makes use of probability, time, velocity and the diffusion coefficient with spatial variability, and reflects two transport mechanisms:
  • Advective (or convective) transport with the mean flow; and
  • Diffusive transport due to concentrations gradients.
Temporal applicability Typically ran over a medium term period (days to months).
Spatial applicability Generally limited to small spatial scales, however, can be applied in a course model to extend estuary-wide.
Links with other tools Typically linked with process-based models such as sediment fluxes, hydrodynamic models, water quality and sediment quality
Data sources Temperature sources for data setup, salinity, suspended sediment concentrations, contaminants. Contaminant discharge information is required for boundary conditions. Calibration and verification data need to be obtained as well as information regarding mass balance and the displacement of the substance.
Necessary software tools / skills Hydrodynamic model, which can interface with the advection-dispersion model. Skills needed include an understanding of the hydrodynamics, material released and estuary processes.
Typical analyses Consider the fate of material released into the environment.
Limitations The considered substance is completely mixed over the cross-section, implying that a source/sink term is considered to mix instantaneously over the cross-section;
The substance is conservative or subject to a first order reaction (linear decay);
Fick's diffusion law applies, i.e. the diffusive transport is proportional to the concentration gradient.
Example applications Humber Estuary, Southampton Water, Mersey Estuary


Numerical models are important engineering tools when considering the prediction of pollution transport in a body of water. Whatever the nature of a particular pollutant, the mixing process responsible for the distribution of quantities of heat, dissolved gas and solids, and suspended sediment, is shown to consist of a uni-directional movement by turbulent mean flows, called advection, and a three-dimensional spreading action produced by the turbulent flow components, called diffusion. Numerical Advection-Diffusion models are intended to make predictions through solution of the so called advection-diffusion equation (Abbott and Basco, 1989):

advection-diffusion equation

where p is the probability, t is time, u is velocity, x is the spatial coordinate and D is the diffusion coefficient. In summary, the equation reflects two transport mechanisms:

Typically, the main assumptions underlying the advection-diffusion equation are:

Read the full PDF document for more information on this methodPDF version

Analysis and modelling

Last Modified on: 19 June 2011
Printed from the Estuary Guide on 18/07/2024 03:21:49